Re: Picked up a project gun at the Southern Side by Side Archived Message
Posted by Mike Jeter on June 10, 2016, 2:22 pm, in reply to "Re: Picked up a project gun at the Southern Side by Side"
I actually lucked out on the firing pins, I talked to Jerry Andrews about the gun since it had been in his shop at some point. Jerry is a wealth of info, especially on guns that he has actually worked on. I ended up using a couple of firing pin return springs out of another gun and left the pins the original length. It solved both problems and I don't have to worry about them hanging on the extractor when opening the gun.
|
|