Posted by David Williamson on October 22, 2015, 12:06 pm
My previous post about these screws somehow got deleted, so I will post it again.
I have in the white the front trigger plate screw. It has an oversize length head so that it can be "timed" to your gun. I can make them to the size that Brophy has in "Plans and Specifications" at .098 and will blue them. If you need them longer let me know.
In making them to size and putting the slot in, most likely these screws will not "time to your gun, but will look nicer than the "buggered" screw that is there. I sell these by the pair (2) or in any denomination after this.
The length for Featherweight and Regular frame guns is the same at .098 but I assure you there will be some over and under, but the .098 should at least be flush.