Re: Fabricate Forearm for Field Grade 16 Gauge Archived Message
Posted by David Williamson on January 27, 2015, 5:44 am, in reply to "Re: Fabricate Forearm for Field Grade 16 Gauge"
Most likely this gun did have 2 for-ends and was sent back for the second set. The reason for the stamping on the loop is so that you get the right for-end that was fitted to that set of barrels. If originally from the factory with two barrels, it would have been made with one for-end that would fit both barrels and not need to be stamped.
|
|