Re: This L C Smith Hammergun Might Be a 10 gauge Archived Message
Posted by Dave Pappas on September 8, 2014, 7:13 pm, in reply to "Re: This L C Smith Hammergun Might Be a 10 gauge"
Thats a great old gun if the bores are not all pitted like the surface of the moon and there no dents that can be seen from the inside I would shoot it with L/P black loads thats what Im doing with mine. By the way are the barrels really thick compared to a normal 12 GA barrel?? does the gun feel about 8 or 9 pounds in weight?? bothngoodn indicators it is a 10 bore. If you remove the fore stock by pulling straight down firmly you can then open the gun and see all the markings on the water table and reciever of the gun
|
|