Re: filings in ejectors, what to do Archived Message
Posted by LTC Marriott on July 18, 2007, 7:44 am, in reply to "Re: filings in ejectors, what to do"
Another method that works is to run a magnet across the springs to draw off the filings.
Air will work, but be careful of sending the filings further into the mechanism.A magnet will draw metal filings-even if they are oil-covered.The stronger the magnet-better the recovery... Carefully done. One of the neatest is the inexpensive telescopic-type shop magnet that extends.Auto parts houses feature them reasonably...
It is handy for finding and recovering misdropped screws and pins.
|
|