Posted by David W on February 9, 2007, 6:56 am, in reply to "Shoebox LC"
If the price wasn't too high I would have done the same. Trying to find a barrel is going to be hard, expecially for an ejector barrel and in 20 ga. The ejector barrels have a little pin under the lug to act as an extractor when the gun is opened. Finding a stock for same is going to be hard also, you might be able to go on ebay and find a few different people who have a ebay store and sell stocks. Try this guy.
Does your forend roller release have the banjo escrutchon? Also check the springs, the one I just bought, the one ejector spring was broken, luckily I found a replacement in a hardware store with a big selection of springs, just had to cut to length. Keep us posted.