[ Post a Response | The SteelNavy.Com Message Board ]
Posted by Darren on November 5, 2024, 17:44:12, in reply to "Plastic thickness on scratch built 1/96 scale superstructures "
I think you mean 0.030" or 30 thou.
030 is still a bit thin for larger sections, it will flex and warp over time.
I use 040 or 060, with plenty of reinforcements inside on larger sections.
Here's an example, 
This is a good forum to visit, http://www.wmunderway.mysite.com/cgi/yabb2/YaBB.pl?catselect=Main
and,
https://www.modelboatmayhem.co.uk/
and,
https://www.rcgroups.com/scale-boats-55/ 
Previous Message
Ahoy all,
I am wondering when scratch building a ship's superstructure in 1/96 scale. Should you use 0.30 or 0.40 plastic sheet?
Any advice would be welcomed. I Thank You for your time.
Calm Seas,
Chris Davis
Responses