I have the 1/350 scale 3D-printed IJN heavy cruiser Furutaka from Globaltoy and the French battleship Bretagne by SSModel on order from eBay; the former has already been shipped (per an email from the seller) but as for the latter, ordered first, no news yet (delivery when ordered was supposed to be by Feb. 23). A little more concerning is that many of these Chinese 3D-printed models I saw advertised a month or two ago no longer seem to be available. Regarding ISW releases, I recently completed their 1944 USS California; the 3D-printed parts were helpful but mostly superfluous; more than enough Carley floats and plentiful 20mm Oerlikons with gun barrels always breaking off and no useful connecting point for the shields (which tended to break off once glued into place). The most problematic issue is that, in this full-hull model, the lower hull isn't deep enough, so that the rudder protrudes below the level of the keel and the propeller shafts cannot be horizontally positioned.
Previous Message
Previous Message
Ebayer Globaltoy is selling a bunch of new 1/350 kits, other sellers on Ebay have had several 1/350 offerings as well (Lilixi is another).