[ Post a Response | The SteelNavy.Com Message Board ]
Re: How do use a brass barrel when there is just a hole in turret face?
glue piece of styrene inside the turret. Glue the base of the barrel to it then make a blast bag
I was thinking about purchasing brass barrels for some of the models in my collection. I examined many of the turrets and the plastic barrels are inserted through the turret face hole from within the turret. Even if I wanted to use a brass barrel it would not fill the hole in the turret face for plastic barrels are usually over scale
I was thinking of using putty from within the turret and push it through the turret face hole and set the brass barrel in the putty. Could also create a blast bag if need be.
Anybody have a good technique?
SteelNavy.Com Home Page