[ Post a Response | The SteelNavy.Com Message Board ]
Re: RN 20mm Ready-Use Ammunition Lockers...........
Based on one of John Lambert's plans for the 71'6" MTB, they should be approximately 30" long, 18" wide, and 24" tall. There are four grouped together.
I have a set of plans by John Pritchard and Model Boats, which show the lockers clearly. I purchased a set of 3-D printed lockers through Shapeways, listed as 1/24th scale, but they are significantly larger than those shown on the plans. Before I go and replace them or attempt to alter them to match the plans, I'd like to confirm their dimensions. I've run into this problem before in the larger scales where something is listed in a particular scale, but is actually larger in size.
Thanks for checking.
SteelNavy.Com Home Page