I have a kit car with Chevette drive and wiring. When I turn the key off, all the lights outside and inside work fine. However, with key on, the turn signals work well and indicators inside work well. But when I turn on the light switch and activate either turn signal, all three indicators inside flash. If I turn highbeams on, all three indicators inside turn on steady. I feel like I'm missing a ground but don't know where to look. Any ideas?
When I bpught the car the wiring was a complete mess and hanging every where. Got everything working correctly but when I bundled all the wires up out of the way of the brakes and gas pedal, this happened. This is the only thing keeping off the road. Any assistance is appreciated....