If it won't bleed, the master cylinder piston may not be returning all of the way, it could be sticking down in the bore. Disconnect the pedal return spring and you can feel the slight resistance as the pedal is depressed.
Glen
--Previous Message--
: Our GT6 has been parked for 3 months (ran
: when parked). When starting the car
: and moving it this weekend we found the
: clutch is not working... it will not
: release and the pedal feels VERY light.
:
: The level of fluid in the reservoir is
: high and where I expect it to be. I do
: not see the level change when an
: assistant pushes the clutch pedal. No
: resistance is felt in the pedal until
: it gets very near the bottom of its
: stroke.
:
: My gut feeling says the master has
: failed. Do you have any suggestions
: for what else to check?
:
: I am also considering getting one of
: TSI's remote bleed kits so I don't have
: to pull the tunnel next time. Do any
: of you have experience with the kit?
:
: Thanks,
: Doug L.
:
:
Responses