Time to do the drive shaft this weekend (I hope). I must assume that, because the Toyota has slip coupling at the tranny output, that you flipped the GT6 drive shaft around and cut off the GT6's slip coupling, "IF" there was enough length remaining.
Is that what you did, or did you leave the GT6's shaft in its original orientation?
Thanks! - Jim
--Previous Message--
: Thanks Jim... That's another good find,
: it looks very detailed.
:
: --Previous Message--
: Hi Guys,
:
: I found the link to the Maintenance
: Manual.
:
:
:
: http://www.gearboxconvert.com/T50_Documents/AE86_Manual/Manual_Transmission.pdf
:
: Enjoy!
:
: Dan: Great fix. You "do"
: know that you're out of control! I
: love that stuff. Wish I had access to
: all the machining tools. However, I'm
: probably dangerous enough with just a
: Mig Welder!
:
: Ciao! - Jim M
:
: --Previous Message--
: Hi Jim- Nice find! I've never seen the
: Cressida but I'll start searching the
: local yards. I agree it's better than
: cutting a hole- and it looks like a
: shorter length cable could be used.
: (not having to make the extra bend like
: mine does)
: I'd like to have a copy of the T50
: manual, if you have my email addy?
: I finished this shaft repair project a
: couple of days ago, and it might
: interest you or others here. A bit off
: topic though since it's on a Midget:
:
:
:
: http://www.westknoxrc.com/index.php/topic,1709.msg10068.html#msg10068
:
: --Previous Message--
: For those of you playing with Toyota
: T50
: Transmission modifications, here's
: something cool.
:
: I was never a fan of having to cut
: through the chassis to run the
: speedometer cable (no offense, Dan).
: After quite a bit of research and
: ultimately a huge stroke of luck, I
: found a 90 degree (almost) angled
: adapter that is compatible with the
: T50. It's off an 81/82 Cressida. If
: ebay still has the pic up you can see
: it here:
:
:
:
:
:
: http://www.ebay.com/itm/271037927830?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
:
: I have also found the actual Toyota
: Maintenance Manual for the T50. Please
: let me know if there's a good place to
: post reference material. I will email
: a copy to anyone who wants it.
:
: Ciao! - Jim M
:
:
:
:
:
:
:
:
:
Responses