--Previous Message--
: My wife took the GT6 to work today, about
: a 50 mile round trip. I checked the
: car when she got home and found that
: the oil leak was more pronounced and
: oil had been "flung" in an
: arc onto the right inner wheel well of
: the bonnet. A quick finger wipe around
: the front of the engine revealed that
: oil was on the bottom of the timing
: chain cover boss where the seal sits.
: To me this implies that the problem
: involves the seal not the sealing block
: of front cover.
:
: I have a speedi-sleeve for the spacer
: behind the harmonic balancer. However,
: I think I will delay any work on the
: front of the engine until I also pick
: up a timing cover gasket and front main
: seal. I plan on doing this only once.
:
: Doug L.
:
:
: --Previous Message--
: The gasket thickness will affect the
: cam
: gear location, relative to the crank
: gear fore/aft. A thicker gasket will
: usually require the crank gear be
: spaced out more.
: Glen
:
:
Responses