|Gwenevere, valmaxi,and Dawn warmly welcome you to Doll Divas|
|[ Post a response | Doll Divas ]|
Question about foamcore for diorama makers
if you have a scrap of foam core, why not try the different suggestions, >>>
Secret to warpage on foam core---is you have to do the same thing on both sides. Sometimes a spray,
Do you think painting it with acrylic paint on the other side will fix it?
Hi, it usually needs to be done in short period of time--I flip them and do them twice on each side,
I already tried it, & it straightened it out pretty well
You can buy a special glue for foamcore board. I find glue sticks work too...>
I thought about spray adhesive, but I didn't want to spray glue around
No, I don't use it very often...if I do the cats are shut out until I have finished and cleared up
I found anything wet will warp form core.
It must be the glue
i've used lots of foam core over the years, Marna, & found if you >>>
Thanks, that's what I was wondering if I should do