Here are the rules:
Ito Bros Stock Eliminator
Designation: AA/S
Class Rules:
(1) Body:
1955 to present. American production vehicles.
Model kit based, resin, or promo bodies.1/24-1/25 scale.
(2)Styrene Bodies:
Vacuum formed bodies not allowed.
(3)Convertibles:
Must run with the top up.
(4)Body Modification:
No modification to body, other than grinding out inside of body to lighten.
(5)Hood Scoops:
Aftermarket hood scoops not allowed, other than OEM.
(6) Spoilers:
Aftermarket spoilers not allowed, other than OEM.
(7)Street Equipment:
All street equipment must be in place. (Headlights, taillights, bumpers, grill, etc)
(8)Windows/Glass:
Model kit glass must be used.
Resin bodies may use Lexan or styrene if kit windows aren’t available.
Lexan or styrene may be used for passenger, and driver windows on model and promo bodies. optional.
No “blacked out” windows. Must be clear.
(9))Body Detailing:
Paint, and detailing to emulate the NHRA Stock Eliminator class cars optional, but highly encouraged.
(10)Body Stance:
Body stance, and ride height to emulate the NHRA Stock Eliminator class cars is highly encouraged.
(11)Interior:
3D driver interior card mandatory. Clear interior card must be painted. Detailing of driver optional but highly encouraged
(12)Chassis:
Any commercially available chassis.
No wheelie bars (no bar)
Inline configuration only.
Rear wheel drive only.
One (1) front mounted guild flag
Hardtail or slip joint allowed.
Axle bearings allowed.
(13)Motor:
Pro Slot PS2001 S16D.
Must retain original magnets.
Must retain original armature.
No shimmering of magnets.
Must retain original end bell and hardware
Any springs and brushes allowed.
No shunt wires.
Any armature shims/spacers allowed.
No “crimping” of can allowed.
(14)Front Wheels/Tires:
.625 (5/8") minimum; .710 maximum diameter rims. Plastic, resin or 3D printed allowed for FRONT wheels ONLY and must be painted or chrome plated.
MINIMUM front tire diameter is .970 tall.
(15)Rear Wheels/Tires:
True scale rim diameter wheels only. "Pencil hub" rims not allowed. Plastic, resin, 3D printed or any non metallic rear wheels are NOT allowed.
Rear tires. 1.125 height, (1 1/8") minimum height; 1.1875 (1 3/16") maximum height. Width: .435 maximum, .400 minimum.
(16)Comm Drops:
Allowed, No freezing allowed.
(17)Minimum Weight:
150 grams
(18)Race Procedure:
Class will run heads-up on a .400 Pro Tree. No glue.

Message Thread
© Copyright 2001-2026 CLUB (.400) All Rights Reserved.
Designed & Maintained by: