Designation: FS/XX
Class rules:
1) 2005 and later Ford Mustang, 2010 and later Chevy Camaro, and 2008 and later Dodge Challenger bodies only; 1/24 or 1/25 scale only.
2) Kit-based or promo bodies only; vac form styrene, R/C or resin bodies are NOT allowed.
3) No cutting of any kind allowed on the bodies other than wheelie bar upright clearance slots in lower rear valance/bumper. Complete opening of rear valance around uprights not allowed. All factory lower body aero skirts, front splitter, and rear valance must be retained and cannot be removed. If the aero items are part of the chassis in the kit used, those items must be cut from the chassis and glued to the finished body. Under side of body may be ground out for lightening purposes only.
4) Blackout windows not allowed.
5) 3D driver interior card mandatory.
6) Parachutes optional but highly encouraged.
7) Inline chassis only; ball bearings allowed. Wheelie bar length, 5" maximum measured from centerline of rear axle to centerline of wheelie wheel axle.
8) Rear tires: 1.125" (1 1/8") minimum height; 1.1875" (1 3/16") maximum. Width: .400 minimum; .435 maximum. True scale rim diameter.
9) Front wheel/tire: .75" (3/4") rims. MINIMUM front tire diameter is .970 tall.
10) Minimum distance width of rear rim/tire: 2.625" (2 5/8") measured from left outer rim edge to right outer rim edge.
11) Phoenix sealed can motor. No modifications. Comm drops and freezing allowed.
12) Minimum weight: 125 grams.
Class will run heads-up on a .400 Pro Tree
First official race at BPR September 29 2018 after the regular program
Message Thread
