For you racers that run the BB/FC class at BP Raceway, these are the rules for the class.


Designation: BB/FC

Body: 1980 and newer funny car body allowed.
Must be a commercially available lexan body.
Must retain full tail light panel.
Minimum height 1/4” (.025)
Measured from the top off the deck to the lowest point of the panel.
Panel must be cut straight across.
Small notches for wheelie bar clearance allowed.
No cut outs in body for tire clearance, or ventilation.
Windshield, and side windows must remain clear.
Back window may be painted.

Spoiler/Wings: Permitted. Styrene, and/or lexan construction only.
Top fuel style wing prohibited.
Wings cannot be longer than one (1) inch measured from the farthest point of the rear main body, to the farthest point of the wing.
Wings cannot be wider than the widest point on the rear deck.

Interior: Must have full interior with 3D center steer driver. Must be painted

Motor: WCDS spec VR12 motor. No ball bearings allowed.

Chassis: Unlimited. Ball bearings allowed.

Front tires/Wheels: Minimum wheel diameter 1/2” (.050) -.003 allowed
Measured from the outside diameter of the wheel.
Any black o-ring allowed.
Wing car wheels/tires “Prohibited”

Rear tires/Wheels: Unlimited, other than .970 minimum tire diameter.

Wheelie Bars: Total length cannot exceed five (5) inches from the centerline of the rear axle, to the centerline of the wheelie wheel axle.

Weight: 80gm minimum weight