Re: Mikunis for an A65
Posted by LDBennett on 8/24/2011, 12:40 pm, in reply to "Re: Mikunis for an A65"
In looking in the referenced book, the smallest Mikuni recommended is a VM 30mm. The jetting he recommends is a 20 -25 pilot jet, #3.0 slide, 159 needle jet type P-2 or P4, 6DH2 needle, 190 main, and a 1.0 air jet. The book explains in great detail how to zoom in on the correct changes from this starting point.|
Here is the link for the JRC carb:
Send an email to Bill Getty (JRC owner at the time my article was written a few years ago) and he will tell you what their experience is with an A65 installation, if they have done one.