Re: Ford transit connect
Edited by UKAT1209 on August 10, 2018, 7:35 am
You know that feeling when you are not thinking about the problem then something springs into your mind. Dpf 2 May be the measurement of the pressure behind the Dpf and that being the case the figure is wrong. Sorry if that was the obvious answer 😉 The pressure was checked before and after Dpf with the pressure after the Dpf was basically zero. I was going to check the sensor signal wire but for those of you that have done one you will know where it is mounted. That is what I don’t understand about designers. What is wrong with extending the pipes up to the baulkhead much like the VAG range. This one is half way up behind all the abs pipes. Difficult to get into from top or bottom. If I am wrong about this please tell me. Despite my age I am still in the learning mode Thanks for your reply Stephen Regards. Les
|