Stoneridge Engineering Home |
|
Stoneridge Engineering Home |
Posted by Bert Hickman Hi, Sorry - I just noticed that I hadn't responded to your earlier message. The construction and relatively large end terminals make it appear that it might be a ceramic transmitting/power capacitor. If so, it will tend to be a bit lossier than a mica cap, but it should function OK as long as you don't overheat it. Good luck, and thanks for the follow-up on the results. -- Bert --
on 1/6/2004, 8:20 am, in reply to "Re: Capacitor"
24.14.130.255
--Previous Message--
: I tryed the caps yesterday in a vttc mountage and they work well, at
: least for short runs. After 1-2 min of function become hot but with no
: detuning problems of the coil.
:
:
Message Thread:
« Back to thread