--- Message Board --: jacobs ladder

--- Message Board --
[ Post your Response | --- Message Board -- ]

Teslamania Message Board
Stoneridge Engineering Home

jacobs ladder

Posted by mario occhipinti on 12/11/2003, 8:21 pm
66.53.167.6

I have disconected to center tap and grounded the case, and now I get about six inches of arc with the welder cranked all the way up, but the breaker still blows at that point. I noticed in one of your emails that you specified a AC welder. I am using a AC/DC stick welder. Is that a possible problem? The only other thing I can think of is possibly the setting inside of the pig is wrong. There are five settings, I have it on the lowest now. Any help would be great. Thanks Mario

Message Thread:

jacobs ladder - mario occhipinti 12/11/2003, 8:21 pm
- Re: jacobs ladder - Bert Hickman 12/11/2003, 9:40 pm
« Back to thread

Post your Response

Your Name:

Your Email:

Subject:

Message:

--Previous Message-- : I have disconected to center tap and grounded the case, and now I get about : six inches of arc with the welder cranked all the way up, but the breaker : still blows at that point. I noticed in one of your emails that you : specified a AC welder. I am using a AC/DC stick welder. Is that a : possible problem? The only other thing I can think of is possibly the : setting inside of the pig is wrong. There are five settings, I have it on : the lowest now. Any help would be great. Thanks Mario :

Optional Image URL:

Optional Link Title:
Optional Link URL:

Notify me by email of all message replies.

Please enter the numbers above. This helps stop spam.

By posting, you confirm that you have read and agreed to be bound by the board's usage terms.

This web site is maintained by Bert Hickman. � 1999-2009, All rights reserved. No portion of this web site may be reproduced without written consent.

Site Meter

Hosted for FREE by Boardhost.
Create your own free message board!