Stoneridge Engineering Home |
Posted by Richard
![]()
on 5/8/2006, 1:23 pm
68.185.199.32
I have a 12Kv 30mA 60hz neon sign transformer/ (1442.9, 36'' tall, 3'' wide, 22g wire) secondary coil / (15.5 turn, .25'', 3'' cemter diameter) spacing flat coil / (12'' diameter, 4.5 tube diameter) torrid.
I calculated that I needed 6.8nf tank cap ( My caps are home made) but when I tested the cap that I made which was very close to 6.8nf I had not sparks from my torrid. Would anyone please help me .. atleast point me in the right direction for good tesla coil formulas and building instructions or help.



Message Thread:
![]()
« Back to thread