[ Post a Response | SurfJet Exchange ]
Posted by surfjetlouie --Previous Message--
on 11/9/2005, 8:40 pm, in reply to "Waterlogged"
65.11.97.242
Split the seam since those are leaky anyway and maybe shave the seam out and glass over then regelcoat the whole thing.
use the 4lb foam for feeling it and use the motor area to cut a hole to pour the foam in.
lets rip the water
surfjetlouie
: I have noticed that ther eare possibly 2
: schools of thought on re-foaming a SurfJet.
: I have a 275ss, and was going to restore it
: this winter. Should I split the board in
: half along the factory seam, or should I cut
: through the top of the board and dig out the
: foam...
:
Message Thread:
« Back to thread