[ Post a Response | SurfJet Exchange ]
Posted by r
on 8/19/2005, 6:57 pm, in reply to "Carb issue"
63.240.15.99
The brass tube?....the inlet on the top of the carb is the point of attachment for the primer... The tube on the bottom is the float bowl drain...it should have tubing attached which exits the fuel outside of the engine compartment...to drain the float bowl, turn the screw counter clockwise....
--Previous Message--
: Does anyone know if the brass tube in the carb
: goes in with the air hole at the top so its
: in the intake channel or at the bottom so it
: is in the bowl?
:
Message Thread:
« Back to thread