[ Post a Response | SurfJet Exchange ]

Re: Throttle held open, butter fly on carb slowly closes

Posted by Ted on 8/6/2008, 5:38 pm, in reply to "Re: Throttle held open, butter fly on carb slowly closes"
96.246.96.125

Watch the connection from the piston of the throttle control to the carb - butterfly control spring attachment. Does it move as the butterfly closes? Does the piston retract as you keep the squeeze handel speed control fully compressed? --Previous Message-- : : : --Previous Message-- : with the throttle held open, the butter fly : on : carb slowly closes, I can go about 15 : seconds, then the board starts to slow down : until the butter fly closes, but I'm holding : the throttle wide open, the preasure in the : line seems ok, with the cover off I can : watch the butterfly slowly closing but the : metal plunger from the throttle doesn't seem : to move, any suggestions, : Thanks : : :

---

Message Thread: Throttle held open, butter fly on carb slowly closes - Dave B 7/29/2008, 10:57 pm Re: Throttle held open, butter fly on carb slowly closes - Ted 8/6/2008, 5:34 pm Re: Throttle held open, butter fly on carb slowly closes - Ted 8/6/2008, 5:38 pm Re: Throttle held open, butter fly on carb slowly closes - Dave 8/7/2008, 11:01 pm « Back to thread

---

Post a Response