[ Post a Response | Classifieds ]
Posted by Dave
on September 21, 2009, 11:27 pm, in reply to "Pro-Stock Style Aluminum Rods SBC NEW!!"
67.84.146.232
--Previous Message--
: Pro-Stock Style" Aluminum
: Connecting Rods for Small block
: Chevy.
: These Rods are NEW, I only used them
: to test fit in my engine, then
: wanted to switch to a Steel rod so I
: could drive safely on the street
: once in a while. All parts are new
: as well
:
: Rod specs:
: 1. 6.0" length
:
: 2. .927 pin
:
: 3. Large Journal (2.1")
:
: 4. ARP #2000 Rod bolts
:
: 5. Includes Bearings (NEW) Federal
: Mogul race bearings
:
: 6. weight 570 grams (Ultra light
: series rod) Sells for over $1100
: with work
:
: work:
: The bearings are Federal Mogul
: Part# 7195CH (2.008") These
: rods had to be drilled for a bearing
: pin, and that work has already been
: done. Set is complete and brand new
: with bearings installed. These are
: designed for Heavy nitrous or high
: boost levels. They are VERY
: expensive rods, and very light.
: Rotating assembly spins up VERY
: quick.
:Asking $800 or any reasonable offer..They are BRAND NEW w/ bearings installed with bearing pin.:
:
Message Thread:
« Back to thread
***NEXT EVENT***
S T R E E T - C A R - S U P E R - N A T I O N A L S - V
November 19th - 22nd, 2009
Las Vegas Motor Speedway
www.streetcarsupernationals.com
1st PSCA Event of 2010
Hughes Performance "Record Breaker Nationals"
January 29th - 31st / Las Vegas, NV. / Las Vegas Motor Speedway