[ Post a Response | Classifieds ]
Posted by DAVE
on September 21, 2009, 11:22 pm
67.84.146.232
Pro-Stock Style" Aluminum Connecting Rods for Small block Chevy.
These Rods are NEW, I only used them to test fit in my engine, then wanted to switch to a Steel rod so I could drive safely on the street once in a while. All parts are new as well
Rod specs:
1. 6.0" length
2. .927 pin
3. Large Journal (2.1")
4. ARP #2000 Rod bolts
5. Includes Bearings (NEW) Federal Mogul race bearings
6. weight 570 grams (Ultra light series rod) Sells for over $1100 with work
work:
The bearings are Federal Mogul Part# 7195CH (2.008") These rods had to be drilled for a bearing pin, and that work has already been done. Set is complete and brand new with bearings installed. These are designed for Heavy nitrous or high boost levels. They are VERY expensive rods, and very light. Rotating assembly spins up VERY quick.
Message Thread:
« Back to thread
***NEXT EVENT***
S T R E E T - C A R - S U P E R - N A T I O N A L S - V
November 19th - 22nd, 2009
Las Vegas Motor Speedway
www.streetcarsupernationals.com
1st PSCA Event of 2010
Hughes Performance "Record Breaker Nationals"
January 29th - 31st / Las Vegas, NV. / Las Vegas Motor Speedway