Posted by Dayspring According to Matrox, the G400 FLEX has some special hardware on it to make it work with the RT2000. A regular G400 or G400MAX will not work with it. Have you tried contacting Matrox themselves to see if they have any replacements? I'm sure that their stock is low, but you might get lucky and be able to pick up a refurb or new one from them. If not, keep an eye on Ebay. That's about the best you can do. I actually gave my RT2000+G400 FLEX to my brother not so long ago, or I would gladly help out. I'm sure some people have them around though. Also, consider going on the official Matrox forums if you have not done so, as I know there are people there who have graduated to the RT.X100 and don't use their RT2000s anymore. The G400 FLEX will actually work with the regular G400 drivers, but not the other way around. Good luck! --Previous Message--
on 3/16/2004, 1:53 pm, in reply to "Re: Need AGP G400flex for RT2000"
24.159.15.19
Hi there!
Matt
: Hi,
: Are the G400 and G400flex the same
: I was under the impression that
: G400flex is specially made for
: RT2000.
: Thanks
: Lin
: --Previous Message--
: TRy Ebay, I have seen G400 cards
: there
: for $25.00. There is no alternate or
: substitution as the two cards are a
: package. Cheers
: --Previous Message--
: Hi,
: I am looking for a replacement for
: the AGP card.
: Mine does not work.
: Thanks
: Lin
: : :
:
Message Thread:
« Back to thread