Posted by Lin Chen I have the same problem, and was wondering if you figured out the problem. My BIOS settings has: Video: PCI or OnBoard/AGP (Tried both) Installed: Sequence: -Tried both cards (with and w/o cable): No video - Installed PCI codec: XP Home recognized and installed the driver. But I couldn't install MVT3.1 as Windows errored "cannot detect RT200". I am guessing it can't detect the AGP video card. Maybe some kind experienced guru can help. Thanks Lin --Previous Message--
on 3/3/2004, 8:45 am, in reply to "Re: RT2K on P4 - No video"
65.200.17.7
Hi,
Plug and Play: Auto or Manual (Tried both)
AGP Aperture: Auto or 8/16/32/64Meg (Tried auto and 64Meg).
: Thanks. I tried all those things. The
: card is acting like it isn't getting
: power.
: --Previous Message--
: If you go into the BIOS, you will
: find
: a setting somewhere that says which
: bus to give priority to when it comes
: to video. Like it will say start AGP
: first or start PCI first. Make sure
: that that is set to AGP. If that
: does not do anything, I would suggest
: moving the PCI card around to other
: slots and see if that makes a
: difference. Also, it's worth
: changing the setting
: "Plug-and-Play OS" to the
: opposite of what it's currently set.
: Hope one of these helps! Cheers!
: Matt
: :
:
Message Thread:
« Back to thread