Posted by LC I have the same problem. There was a post on Matrox forum about some utility, but I could not find it. I disabled the video driver (integrated on my MOBO) and defaulted to VGA. Rebooted and still nothing. I also moved the video cable to the AGP card outputs: first one was blank, and second one (the NTSC output had vertical bars of various colors. I have a Compaq S6000Z with AMD 3000+. Thanks Lin --Previous Message--
on 2/18/2004, 9:58 am, in reply to "RT2K on P4 - No video"
192.100.104.18
Hi,
I don't know how to verify what AGP voltage is ? How did you verify ?
Don't have any idea what mother board it is.
: I recently purchased a new P4 system
: with a 1.5v AGP slot. I did so base
: on several posts by Matrox technical
: support on the Matrox forums stating
: that the RT2K card is in fact 1.5v
: compliant. When I put the G400Flex
: card into the computer, the system
: boots, but I get now video. So I put
: the PCI card in with the AGP card and
: get video out of the PCI card, but
: Windows does not detect the AGP card.
: My guess is that my card is not 1.5v
: compliant. I have sent 3 e-mails to
: technical support and recieved no
: response at all. It has been 3 weeks
: and I am a bit frustrated. I would
: call, but I have placed restrictions
: on my phone for International calls
: (my last call to Matrox cost me
: $190). Has anyone had any experience
: with this? I put the card back in my
: old PIII and it works just fine.
:
Message Thread:
« Back to thread