Re: How do I identify my Safety
Posted by Tom Garver on February 19, 2018, 4:24 pm, in reply to "Re: How do I identify my Safety"
Fred,the safety push rod and the safety slide DO NOT get welded together. There is a portion of the safety slide that is not shown in the photos that Dr. Drew posted. There is a small metal rod that slides thru the bottom tang on the safety button. That rides up and down on a metal piece that has ridges and detents. The rod will settle in the middle detent when in the safe position and in the front or rear detent when in firing position. When the safety button is pulled to the rear position the gun remains in the firing mode, when pushed all the way forward it will return to safe after one barrel is fired. Have you disassembled your gun to find out if you have all of these parts?|