Posted by revdocdrew on February 8, 2008, 7:01 am |
Thanks to all!
- Re: Smith Skeet chokes
Posted by Bob Duffy on March 2, 2008, 5:35 pm, in reply to "Smith Skeet chokes"
205.188.116.208Drew, If I did it right my skeet special is 015 and 035. 12 Gauge 28 in. barrels. Imp cyl & full ? - Re: Smith Skeet chokes
Posted by Ralph English on February 28, 2008, 3:34 pm, in reply to "Smith Skeet chokes"
75.75.16.244Hello Drew, I measured the following: 12 ga. SKEET SPECIAL (1934) Left .007 Right .015 12ga PREMIER SKEET (1949) Left .005 Right .010 - Re: Smith Skeet chokes
Posted by Jim T on February 8, 2008, 11:33 am, in reply to "Smith Skeet chokes"
12.106.230.149Drew: My Premier Skeet has 2 sets with the 2nd being Full cylinder & Improved - origional set (Skeet & Skeet)was part of a messy divorce where the divorcee kept them. She maintained that she'd melt them down before selling. I've looked on Ebay every day for years just to see if maybe she'd try to sell them. So the story goes... Jim T - Re: Smith Skeet chokes
Posted by Dave Miles on February 28, 2008, 6:50 pm, in reply to "Re: Smith Skeet chokes"
24.11.126.23Holy Cow Jim, if that don't beat all!
The wife keeping the second barrel of a two barrel set in the divorce. She sounds like a mean person. :-) - Re: Smith Skeet chokes
Posted by revdocdrew on February 28, 2008, 12:11 pm, in reply to "Re: Smith Skeet chokes"
72.222.168.170OK-officially whining now 
SOMEBODY pulleeezzze measure their skeet gun's chokes for me. - Re: Smith Skeet chokes
Posted by Silvers on March 2, 2008, 6:32 am, in reply to "Re: Smith Skeet chokes"
208.111.194.176I have a Model 21 skeet gun - original - but it's with #1 son right now about 3 hours away. We'll be visiting next week and I'll measure the chokes. I do know the WS-1 choke is belled, i.e., the very front end has a reverse funnel of sorts that starts at a constriction back a bit from the muzzle. More to come. Frank - Confusion about chokes
Posted by David W on March 2, 2008, 6:57 am, in reply to "Re: Smith Skeet chokes"
68.39.186.119I'm a little confused as by what all manufactures say that their guns are choked Skeet 1 and Skeet 2, WS1,WS2, and so on and when measured come up to be .005 in one barrel and .010-.015 in the other barrel. Wouldn't that be imp.cyl/mod? I thought Smith chokes were parallel for 1 inch and then a taper from start of choke to bore for another 1 9/16. Did the skeet chokes differ in length?