Posted by David Williamson on September 9, 2017, 6:55 am, in reply to "Re: LOP "
Dick if you look at the form that Brother Drew posted you will see that they ask for the length of pull you want from what ever position the HOT is in. Therefore your length of pull would not chance from any position you ordered.
Phil, in your question the LOP has to change for a correct fit. One inch shorter would mean that your finger would not be positioned right on the trigger.
This only applies to guns made at the factory, if you sent the gun back for a HOT, then the factory would have to make a spacer for the correct LOP. I'm sure you have seen guns with a thicker butt plate to increase LOP or even a recoil pad.