Re: 20ga Field....3 position safety and ivory bead sights Archived Message
Posted by Tom Martin on December 9, 2016, 7:38 pm, in reply to "Re: 20ga Field....3 position safety and ivory bead sights"
It is pretty easy to convert a 3 position safety to a 2osition safety, and the gun does not have to be permanently modified. All that is required is to place a piece of metal in the slt of the top tang to block the safety from going into the rear position. I would fashion a piece of brass that was a few thousandths oversize in width and force it into the slot to block the rearward movement of the safety. Such a modification will not permanently harm the gun and can be rremoved at a later date if desired.
|
|