Re: Extractor set-up in ejector gun Archived Message
Posted by David Williamson on January 26, 2016, 6:11 am, in reply to "Re: Extractor set-up in ejector gun"
Bill, I believe the parts Numrich has are for Featherweight frames and although some of the parts are interchangeable, I'm not sure of all. If all of the parts are missing from your for-end, you will have to find ejector cocking plates in order for your gun to cock after firing. An extractor cocking plate will not fit in your for-end. The best way is to take inventory of what you do have and try and find an ejector for-end on eBay or put a post on here stating you are looking for one. Since you have the metal already, fitting the parts from another for-end into yours will make sure it fits to your gun. Very seldom does an orphaned for-end fit.
|
|