The L.C. Smith Collectors Association
[ Message Archive | The L.C. Smith Collectors Association ]

    Re: L C Smith sxs 12 Ga. parts Archived Message

    Posted by David Williamson on January 7, 2016, 2:50 pm, in reply to "L C Smith sxs 12 Ga. parts"

    Ray, 95008 is in the missing numbers and would be from around 1900.
    The bushings you can find on eBay, http://www.ebay.com/itm/L-C-SMITH-FIRING-PIN-BUSHINGS-EASY-TO-INSTALL-/301792693745?hash=item46443f0df1:m:mRCY49bo8HvFK2pyRS32d7Q
    These have to be fit as they go in at an angle and used ones most likely will not fit for this reason.

    The trigger spring could be one of two types and I think it is the one that is held in with a small 4-40 screw that shows the threaded hole in the trigger housing. I had to make one from an old hack saw blade works fine.
    I thought I had a print of this one but can't find it right now, will look.

    The other type is a bent piece of .020 music wire.



    As to the safety spring, again their are two types, one for a three position and the other for a two position. Once you find out which one try Jerry Andrews 304-281-1740

    Message Thread: