Re: Hunter Arms - Fulton special hammer removal and firing pin repacement Archived Message
Posted by M14ripsaw on September 27, 2015, 1:38 pm, in reply to "Re: Hunter Arms - Fulton special hammer removal and firing pin repacement"
Good stuff, thanks David. I am at the point in your third from last pic posted. But the hammers still won't come out. Also curious about how to take out the cocking piece from the receiver...the piece that cocks the two hammers. Can't find a pin or anything holding it in there except the hammers. I can only assume it will come out if I ever get the hammers out. Thanks for the help, I appreciate it. P.S. My firing pins have no spring or plunger at the rear and appear to be free floating outfits. That may be why they are prone to break. People dry firing them with no cases in the tubes, or the left one hanging out when the gun is broken over to reload and broke the tip off. ???
|
|