Posted by E John Boylan on December 9, 2014, 7:35 am, in reply to "Re: Top Lever Binding"
Well David, I figured that if you couldn't give me a back door way to get to the screw(s) on the top tang under the top lever, then it was a lost cause anyway and I might as well get the big hammer out and go ahead and just knock the top lever off. Before I did that however, I tried one last time to to push the lever over. Lo and behold, with your encouragement to really crank down on it (and letting everything soak in PB Blaster since 3:00 a.m.), the lever finally snapped open. Thank you. Now it's time to get the stock out and see what happened and what can be done about it, plus fix all those cracks in the stock. Thanks again.