I'll have to look at the load data, I've been using it in all my 12ga rounds for about 2-years never had a problem before. I will report back with exact load data. Everything is pointing to full recovery, The injury is to my left forearm and is healing well. I have full use of my arm and hand (all fingers working well) just some lifting restrictions as the cut got into the muscles a bit and required stitches. As time allows I'll be reviewing my loads for possible revisions but they have worked well including in some guns that are older than the one I was using. Also FYI the metal at the break was NOT thin I haven't measured it but two machinists that looked at it out the thickness at 90/1000ths plus.