Re: Forarm, 20's era 16 Ga. Archived Message
Posted by Jim Akins on November 30, 2008, 12:39 pm, in reply to "Re: Forarm, 20's era 16 Ga."
The forend iron that Numrich sells is a little oversize for even a 12ga FW frame gun. It will work on any FW frame gun but will have to be sized for the gun that it is going to be used on. After purchasing all the metal parts you will have 50-60.00 invested + whatever it cost for wood. Wood shows up on ebay fairly regularly, if you can find a complete forend for under 150.00 good luck.
Jim
|
|