Re: LC Smith double barrel 12 gauge shot gun Archived Message
Posted by revdocdrew on May 26, 2007, 3:25 pm, in reply to "LC Smith double barrel 12 gauge shot gun"
Fully open the gun to cock the hammers, close the gun, then remove the forend and lift the barrels off the receiver. The hammers must remain cocked or you will be unable to re-attach the forend. The serial numbers and grade will be stamped on the flat part of the receiver You can then find the date of manufacture here http://www.lcsmith.org/serial.php And grade information here http://www.lcsmith.org/shotguns/grades.html After reassembly, I would suggest dropping the hammers on snap caps, but always remember to cock the hammers before disassmbly.
|
|