Enigma
Posted by Terry Reckart on January 12, 2019, 7:56 am
I recently received my letter on a Specialty grade single barrel trap gun serial number S 101585. The letter states that the gun was shipped with 32" barrels, however, the barrels measure 28 7/8". There are no indications that the barrels were cut. The choke constriction measures in the full choke range (using Jents plug gages) and the choke measures a little more than 1 1/2 inches in length. The high rib on the gun shows no signs of being modified. The barrel is serialized to the gun. To the best of my knowledge 3" of barrel could not have been cut off and any choke remain. Anyone have any thoughts on this?
|