The L.C. Smith Collectors Association
[ Post a Response | The L.C. Smith Collectors Association ]
Re: barrel breech jeweling
Posted by David Williamson on July 16, 2017, 4:15 pm, in reply to "barrel breech jeweling"
Bryan, I think that jeweling is from when the ends of the barrels were milled. I have never measured the breech face to the receiver's water table, but I believe they are not 90 degrees, so he barrels would have to be milled to the same angle.
If they were a little off, they would have to be filed.
That is my theory.