Posted by Patriot
on July 30, 2012, 12:20 pm, in reply to "Re: Complete crack through stock head help needed"
24.14.161.55
Looookin' good. Looks like you put a coat of glass over all the sidelock inletting..you will probably have to scrape off the surface where the sidelocks rest or they will be too high. Also maybe other spots where the lock work meets the wood.
On the inner inletting where the safety and upper tang screw tower is, I spread some of the thin super glue on the surfaces and let it soak in. Sometimes it takes 2-3 coats before it shines after drying depending on wood density.
138
Responses « Back to index | View thread »