Renesas Evaluation Boards User Forum: FDT problems

Renesas Evaluation Boards User Forum
[ Post a Response | Renesas Evaluation Boards User Forum ]

FDT problems

Posted by david on November 21, 2004, 10:12:24
199.203.92.86

Hello all,
I am trying to connect via serial port from the FDT to the 3DK. I need support regarding that, because the connection is not completed. There is an error at the end when the FDT is determining the baud rate. This happens for every baud rate I try to determine.

See this log file form the FDT.
THE LOG FILE:
Initiating BOOT SCI sequence
Attempting 9600
Received immediate response from device: 0xE6
Detected 0.18um device
Requesting supported devices list...
List received - 1 selectable device(s)
Device Code, Product Code: 0t02,HD64F2166

Selecting Device - 0t02
Device selected

Requesting supported clock modes list...
List received - 1 selectable clock mode(s)
Clock Mode: 0x00

Selecting Clock mode - 0
Clock mode selected

Requesting supported multiplication ratio list...
List received - 1 types of multiplication ratio(s) Multiplication Ratio type 1:
Multiplication Ratio = 1
Requesting supported operating frequencies list...
List received - 1 operating frequency range(s)
Operating Frequency Range 0: 5.00 - 40.00 MHz

Requesting user-boot ROM information...
List received - 1 user-boot ROM area(s)
User Boot ROM Area 0: 0x00000000 - 0x00001FFF

Requesting user ROM information...
List received - 1 user ROM area(s)
User ROM Area 0: 0x00000000 - 0x0007FFFF

Requesting erase block information...
List received - 16 erase block(s)
Erase Block 00: 0x00000000 - 0x00000FFF
Erase Block 01: 0x00001000 - 0x00001FFF
Erase Block 02: 0x00002000 - 0x00002FFF
Erase Block 03: 0x00003000 - 0x00003FFF
Erase Block 04: 0x00004000 - 0x0000BFFF
Erase Block 05: 0x0000C000 - 0x0000CFFF
Erase Block 06: 0x0000D000 - 0x0000DFFF
Erase Block 07: 0x0000E000 - 0x0000EFFF
Erase Block 08: 0x0000F000 - 0x0000FFFF
Erase Block 09: 0x00010000 - 0x0001FFFF
Erase Block 10: 0x00020000 - 0x0002FFFF
Erase Block 11: 0x00030000 - 0x0003FFFF
Erase Block 12: 0x00040000 - 0x0004FFFF
Erase Block 13: 0x00050000 - 0x0005FFFF
Erase Block 14: 0x00060000 - 0x0006FFFF
Erase Block 15: 0x00070000 - 0x0007FFFF

Requesting line size information...
Line size received - 128

Requesting write method information...
List received - single mat write

Requesting ECC write information...
ECC write received - 0

Changing baud rate to 1200 bps
Error No 15005: 'COM1:' read time out
Error No 16148: Unable to set baud rate value = 1200 -->> this happens for all baud rates

Message Thread:

FDT problems - david November 21, 2004, 10:12:24
- Re: FDT problems - sgirish March 8, 2005, 4:51:14
« Back to thread

Post a Response

Your Name:

Your Email:

Subject:

Message:

--Previous Message-- : Hello all, : I am trying to connect via serial : port from the FDT to the 3DK. I need : support regarding that, because the : connection is not completed. There : is an error at the end when the FDT : is determining the baud rate. This : happens for every baud rate I try to : determine. : : : See this log file form the FDT. : : THE LOG FILE: : Initiating BOOT SCI sequence : Attempting 9600 : Received immediate response from : device: 0xE6 : Detected 0.18um device : Requesting supported devices list... : List received - 1 selectable : device(s) : Device Code, Product Code: : 0t02,HD64F2166 : : : Selecting Device - 0t02 : Device selected : : : Requesting supported clock modes : list... : List received - 1 selectable clock : mode(s) : Clock Mode: 0x00 : : : Selecting Clock mode - 0 : Clock mode selected : : : Requesting supported multiplication : ratio list... : List received - 1 types of : multiplication ratio(s) : Multiplication Ratio type 1: : Multiplication Ratio = 1 : : : : : : Requesting supported operating : frequencies list... : List received - 1 operating : frequency range(s) : Operating Frequency Range 0: : 5.00 - 40.00 MHz : : : Requesting user-boot ROM : information... : List received - 1 user-boot ROM : area(s) : User Boot ROM Area 0: 0x00000000 : - 0x00001FFF : : : Requesting user ROM information... : List received - 1 user ROM area(s) : User ROM Area 0: 0x00000000 - : 0x0007FFFF : : : Requesting erase block : information... : List received - 16 erase block(s) : Erase Block 00: 0x00000000 - : 0x00000FFF : Erase Block 01: 0x00001000 - : 0x00001FFF : Erase Block 02: 0x00002000 - : 0x00002FFF : Erase Block 03: 0x00003000 - : 0x00003FFF : Erase Block 04: 0x00004000 - : 0x0000BFFF : Erase Block 05: 0x0000C000 - : 0x0000CFFF : Erase Block 06: 0x0000D000 - : 0x0000DFFF : Erase Block 07: 0x0000E000 - : 0x0000EFFF : Erase Block 08: 0x0000F000 - : 0x0000FFFF : Erase Block 09: 0x00010000 - : 0x0001FFFF : Erase Block 10: 0x00020000 - : 0x0002FFFF : Erase Block 11: 0x00030000 - : 0x0003FFFF : Erase Block 12: 0x00040000 - : 0x0004FFFF : Erase Block 13: 0x00050000 - : 0x0005FFFF : Erase Block 14: 0x00060000 - : 0x0006FFFF : Erase Block 15: 0x00070000 - : 0x0007FFFF : : : Requesting line size information... : Line size received - 128 : : : Requesting write method : information... : List received - single mat write : : : Requesting ECC write information... : ECC write received - 0 : : : Changing baud rate to 1200 bps : Error No 15005: 'COM1:' read time : out : Error No 16148: Unable to set baud : rate value = 1200 -->> this : happens for all baud rates : : : :

Optional Image URL:

Optional Link Title:
Optional Link URL:

Please enter the numbers above. This helps stop spam.

By posting, you confirm that you have read and agreed to be bound by the board's usage terms.

Evaluation Kit Support
Renesas Evaluation Boards are intended for evaluation of Renesas microprocessors only, not as development tools.

Hosted for FREE by Boardhost.
Create your own free message board!