Posted by Mike [HKEY_LOCAL_MACHINE\SOFTWARE\Hitachi\FDT\2.2\Serial] --Previous Message--
on February 6, 2004, 11:43:48, in reply to "FDT failure on notebook pc!"
203.129.230.91
Try setting UseCommsDll=0 in registry.
: Hi!
: I have some problems reprogramming
: the flash of my EVB2623F board. First
: I tried FDT v1.5, but it didn't
: manage to connect. I read the
: Known_problems.txt file, and tried
: the serial port fix mentioned there
: because I run this on a notebook pc.
: But it didn't help, so I tried FDT
: v3.1 instead (with the Protocol A
: plug-in to support my EVB). I still
: have problems to connect though, and
: v3.1 doesn't feature any serial port
: fixes. Here's my log from v3.1:
: Connecting to device 'H8S/2623F' on
: 'COM1'
: Configuration: 'BOOT Mode' connection
: using the HMSE Universal Programming
: Board
: Opening port 'COM1' ...
: Loading Comms DLL
: Loaded Comms DLL
: Looking for running kernel...
: Unable to download DeviceID from
: target
: No running kernel found, booting
: device...
: Resetting interface
: Taking RESET line low (Reset On)
: Enabling 12V supply
: Enabling Vpp supply
: Enabling MDx
: Taking RESET line high (Reset Off)
: Booting FZTAT device
: Error No 15005: 'COM1:' read time out
: Using micro-Kernel :
: 'D:\Voodoo\FDT3.1\Kernels\ProtA\2623\Hitachi\0_0_00\uGen2623.cde'
: Error No 15032: Interface failed to
: respond
: Error No 15019: Download() failed
: Error No 15005: 'COM1:' read time out
: Error No 15035: Unable to get version
: information from interface
: Unloaded Comms DLL
:
: Anyone else experienced the same
: problems?
: Regards
: Henrik
:
:
:
Message Thread:
« Back to thread