Posted by Henrik Gildå I have some problems reprogramming the flash of my EVB2623F board. First I tried FDT v1.5, but it didn't manage to connect. I read the Known_problems.txt file, and tried the serial port fix mentioned there because I run this on a notebook pc. But it didn't help, so I tried FDT v3.1 instead (with the Protocol A plug-in to support my EVB). I still have problems to connect though, and v3.1 doesn't feature any serial port fixes. Here's my log from v3.1: Connecting to device 'H8S/2623F' on 'COM1' Regards
on February 4, 2004, 6:58:44
192.138.116.162
Hi!
Configuration:
'BOOT Mode' connection using the HMSE Universal Programming Board
Opening port 'COM1' ...
Loading Comms DLL
Loaded Comms DLL
Looking for running kernel...
Unable to download DeviceID from target
No running kernel found, booting device...
Resetting interface
Taking RESET line low (Reset On)
Enabling 12V supply
Enabling Vpp supply
Enabling MDx
Taking RESET line high (Reset Off)
Booting FZTAT device
Error No 15005: 'COM1:' read time out
Using micro-Kernel : 'D:\Voodoo\FDT3.1\Kernels\ProtA\2623\Hitachi\0_0_00\uGen2623.cde'
Error No 15032: Interface failed to respond
Error No 15019: Download() failed
Error No 15005: 'COM1:' read time out
Error No 15035: Unable to get version information from interface
Unloaded Comms DLL
Anyone else experienced the same problems?
Henrik
Message Thread:
« Back to thread