DA Channel 2 and 3

Posted by Robert M on April 10, 2003, 6:41:50
81.223.7.139

Why does this code not work? Channel 0 and 1 are working but channel 2 and 3 do not convert voltage. MSTPCRA &= ~0x04; MSTPCRC &= ~0x20; if (cWhich == 0) DADR0 = (char)iSelect; if (cWhich == 1) DADR1 = (char)iSelect; DADR2 = 0x0F; DADR3 = 0x0F; DACR01 |= 0xE0; DACR23 |= 0xE0; Thanks Robert

---

Message Thread: DA Channel 2 and 3 - Robert M April 10, 2003, 6:41:50 Re: DA Channel 2 and 3 - DrE April 10, 2003, 15:54:50 Re: DA Channel 2 and 3 - Robert M April 12, 2003, 8:46:07 Re: DA Channel 2 and 3 - DrE April 14, 2003, 12:03:21 Re: DA Channel 2 and 3 - Robert M April 14, 2003, 17:39:23 « Back to thread

---

Post a Response

Evaluation Kit Support
Renesas Evaluation Boards are intended for evaluation of Renesas microprocessors only, not as development tools.