North American Fireball Message Board: Re: mast rake

[ Post a Response | North American Fireball Message Board ]

Re: mast rake

Posted by Measurer on 8/13/2008, 11:13 am, in reply to "mast rake"
216.221.90.199

Check out the articles in the Tech section of this web page, lots of good information on how to set up the mast on your boat.
The mast ram/strut does not factor into basic mast set up, so do don't have to worry about this

--Previous Message--
: I have an old woodie, with no mast
: ram. The shrouds are attached to
: metal plates with a series of holes
: to allow for adjustment.
:
: How should I rake the mast for the
: best results in different wind
: strengths?
:
: John (KC 3067)
:

Message Thread:

mast rake - johnskennedyab 8/13/2008, 10:20 am
- Re: mast rake - Measurer 8/13/2008, 11:13 am
« Back to thread

Post a Response

Subject:

Message:

--Previous Message-- : Check out the articles in the Tech : section of this web page, lots of : good information on how to set up : the mast on your boat. : The mast ram/strut does not factor : into basic mast set up, so do don't : have to worry about this : : --Previous Message-- : I have an old woodie, with no mast : ram. The shrouds are attached to : metal plates with a series of holes : to allow for adjustment. : : How should I rake the mast for the : best results in different wind : strengths? : : John (KC 3067) : : :

Optional Image URL:

Link Title (Manditory, if posting a link):
Optional Link URL:

By posting, you confirm that you have read and agreed to be bound by the board's usage terms.

Thanks for stopping by!

Phil Locker - CAN14678 - marshall of the message board

Hosted for FREE by Boardhost.
Create your own free message board!